Before & After Photos

This sidewalk was experiencing settlement and gaps so severe the City told them to get it fixed or they will be charged for a replacement. We were able to fix the concrete by injecting PolyLevel foam to lift and level the concrete slab back to its original position! 

This Maryville homeowner had wide cracks in their driveway along with some uneven surfaces in the concrete. Not only are cracked concrete surfaces bad for your tires, but they also can sink your home's curb appeal! For this job, we lifted and leveled the surface using PolyLevel, a foam that is injected under the surface of the concrete. Then to seal up those cracks we used our NexusPro silicone-based joint sealant. 

The homeowner in Stilwell, KS was struggling with their concrete leading from the driveway up to the front steps. There was major settlement that had occurred and it was becoming a trip hazard. Worried that it would become worse and other parts would also start to settle, they decided to call Thrasher.

The crew was able to identify that major settlement had occurred because the soil underneath had washed away due to exposed joints. We used PolyLevel to bring the slab back up to the original level, getting rid of the trip hazard. Then to seal the joints we used NexusPro Joint Sealant to close up the exposed joints and prevent water from entering. The customer was extremely happy to never have to worry about tripping over their concrete again.

These front steps were sinking due to water getting underneath the concrete slab and making the soil swell. To permanently fix this problem, we raised the slabs back in place and then sealed the joint and cracks around the area. We used a polymer foam to raise the slab back up to help stabilize it. The foam is waterproof and is installed under high pressure which allows it to lift effortlessly. We then used a silicone joint and crack repair caulk to seal all cracks and joints. 

Aesthetically, Joe hated the way his driveway looked. It was uneven, settled, and cracked. And he was scared that it would just keep getting worse and worse if nothing was done. After looking into concrete repair, he came across Thrasher.

That's when System Design Specialist, Brandon Powers, went to Joe's home to look at his driveway and come up with a plan of action. Brandon determined that erosion had caused voids throughout the concrete in the driveway and front walkway. The settlement in the concrete also caused several cracks. Brandon brought out the install team to get to work. The first step was using PolyLevel to lift, level, and stabilize the concrete. And then use NexusPro to seal the joints and repair cracks. 

Once everything was complete, Joe was so excited about how much better it looked. He 100% expected to have to replace the concrete and was shocked they were able to salvage the existing concrete and make it look great, at a fraction of what replacing would cost.